Single Point Mode
The generated rod is precisely perpendicular to the ground, while the real rod is not necessarily perpendicular to the ground due to the instrument scanning unilateral, tilt itself, thick at the bottom and thin at the top, etc.
Steps
1.In the Road Facilities panel, click on the drop-down logo on the right and select Detect Pole button.
2.Pole Detection setting dialog box should pop up.
Single point mode.
Single Point Mode Dialog
Single Point Mode Dialog Custom Line Layer
Parameter description:
Rod Radius: The default is 0.5 meters, which means that the self-clicked key point is the reference point, and the radius of the selected box rod is the radius, and the cylinder is vertically downward.
Layer: The default is street light, the options are: streetlights, utility poles, and also custom layers to add a line layer, indicating the layer where the vectorization results are deposited.
Mode: The default is single point mode, which means the operation mode of clicking on key points.
3.Click on the top of the pole with the left mouse button to automatically generate a single pole. The details are shown in the figure. The yellow dot is the key point clicked by the mouse. It is recommended to click on the top position of the rod.
Click on the key point
Single point mode renderings