Height Limit Analysis

Function Description

It provides the capability to measure the height of power lines above the ground. It supports both automatic measurement with regular intervals and report generation.

Steps

1.Click on Height Limit Analysisbutton. A pop-up dialog box appears.

Parameter Description

• Cylinder Radius: Radius of the cylinder used for sampling at measurement points.
• Cylinder Bottom(A): Height below the sampling cylinder at the measurement points.
• Target: Minimum Height (the lowest point within the cylinder is considered as ground). Maximum Height (the highest point within the cylinder is considered as ground).
• Step: Interval measurement.
• Ground Class: Class of the ground points. If not classified, all classes can be selected.

2.Select the power line vector. Then set the parameters and ground point categories (setting appropriate categories can improve the accuracy of automatic measurement). Click "OK" to start the measurement.

3.Report Generation.

Export all measurement results to a report. For the results, please refer to the Power Line Height Limit Analysis Report.

4.After exporting the report, you can see in the 3D window that the minimum height vector line is blue and the highest height vector line is red.