Forestry Module FAQ

Azimuth

1. [Azimuth] The picked point is not tree seed.
   • Error Reason: The selected point is not in the tree layer or is not a seed point generated by the forestry module function. -Solution: If the selected point is not in the tree layer, it needs to be imported into the tree layer before being converted to a seed point using the Seed Point Conversion function. If the selected point is in the tree layer, use the Seed Point Conversion function directly to convert it to a seed point.

Segmentation

1. The individual tree segmentation result is incorrect. Only a small section in the middle of the trunk is segmented.
   • Error Reason: The error is primarily due to the point cloud used for individual tree segmentation not being normalized, while the Normalized option was selected in the software interface. This mismatch caused the incorrect segmentation result. The Normalized option should only be selected if the point cloud has actually been normalized.
   • Solution: If the data has not been normalized, uncheck the Normalized option and then run the Segmentation.