Sag Analysis

Summary

Analysis sag, line length etc based on vector file or simulation file input.The result data can be saved as(*.csv *.xls)and generate report. Clickto add data, clickto remove data selected, clickto clear data list.

Usage

Click Completion Analysis > Sag

Parameters

• Sag Analysis(checked by default): Checked to calculate sag etc.
  • Adjust Sag With Point Cloud(unchecked by default): Adjust sag based on point cloud.
  • Distance to Ground(unchecked by default): Calculate distance to ground.
  • Sag Deviation(unchecked by default): Calculate Sag Deviation.
  • Observed Temperature: Temperature when scanning.
  • Observed Wind Speed(m/s): Wind speed when scanning.
  • Powerline File: Set input file for powerline sag analysis, file format:shp.
  • Shield Line File: Set input file for ground conductor sag analysis, file format:shp.
  • Conductor File: Set input file for conductor sag analysis, file format:shp.
  • Output Path: cache/SagAnalysis/ by default.
  • Output Format(csv by default): support csv and xls.
• Generate Report(checked be default): Generate report.
  • Assessor Company: Assessor company.
  • Electrical Transmission Bureau/Company: Electrical transmission bureau/company.
  • Line Name: Line name.
  • Target Coordinate: Target Coordinate System.
  • Report path: Path to store result files.
• Threads Num(4 by default): Set the number of thread (1 to 32) to run this function. The software can record the currently setting and when the user open this function again, the setting will be kept.

Note: Input data includes vector file and simulation file*.LiSim.And the vector file should be shapefile(.shp) created by vectorization, not simulation.