Interactive Patch Line
Summary
This feature is mainly used to fill in partially sparse or broken power lines. Click 
to remove the selected fitting result, click 
to clear the fitting result list, click 
to clear the fitting result list.
Usage
Click Toolbox > Point cloud Processing > Interactive Patch Line
Fitting Result List
Fit and fill the selected area based on calculation, and preview the discrete point effect in the scene after calculation is complete.
Clear the selected area.
Merge the point cloud and discrete points, and generate a point cloud file with the same name in the output directory.
Parameter Settings
- Line Type: The type of line to fit the selected area, which can be "Straight Line" or "Parabola" according to the actual power line.
- Target Category: The category of power line to be filled, default is conductor.
- Line Width: The width of the power line to be fit in the selected area, default is 30mm.
- Point Spacing: The spacing between discrete points for fitting the selected area, default is 0.01m.
- Discrete Point Number: The number of discrete points for fitting the selected area, default is 2.
- Translation: Translation parameters for the fitted result along the X/Y/Z coordinate axes.
- Rotation: Rotation parameters for the fitted result around the X/Y/Z coordinate axes.
Steps
1. Move the scene to the area needing patch line and select a closed polygon.
2. Select the suitable target category and fitting parameters, click Calculate .
.3. Adjust the position of the discrete fitted result through translation and rotation, then merge .
.