• User Guide
  • Copyright Information
  • Introduction
  • Software Installation and Activation
  • File
    • New Project
      • New MLS Georeference Project
      • New SLAM Georeference Project
      • Convert Data
      • New Mapping Project
    • New From Template
    • Open Project
      • Open Georeference Project
      • Open Mapping Project
    • Modify Project
    • Batch Processing
    • Save Project
    • Save As Project
    • Close Project
    • Option
    • About
    • License
    • Help
    • Exit
  • SLAM Data Processing
    • Understanding the SLAM Processing Interface
    • SLAM Data Structures and Definitions
    • SLAM Settings Definitions
    • Create New SLAM Data Processing Project
    • Open SLAM data processing project
    • SLAM data processing under relative coordinates
    • SLAM data processing using GCP
    • SLAM data processing using RTK
    • SLAM process using PPK
    • Close-loop editing
    • Data merging
    • Accuracy check
    • Camera Calibration
    • How to Make a MASK
    • Some experience sharing on processing
  • MLS Data Processing
    • Explanation of Original Data Structure
    • New MLS Project
      • New MLS Project by *.live File
      • New MLS Project by Existing Data File
      • New MLS Project by Calibration File
    • Parameter settings
    • Control Point Editor
    • MLS Data Georeferencing
    • Register
    • MLS Output Data Processing
    • Report
      • Trajectory Plot
      • Trajectory Report
      • Strip Adjust Report
      • Accuracy Check
    • Convert
      • Convert to Mapping Project
      • Organize into Mapping Project
    • Display
      • Go to Trajectory
        • Trajectory
      • Display Setting
      • Show Task
    • Directory Tree Management
    • Explanation of Processed Data Structure
  • Tools
    • Point Cloud Measurement Tools
      • Pick Point
      • Pick MultiPoint
      • Density Measurement
      • Length Measurement
      • Area Measurement
      • Angle Measurement
      • Gradient Measurement
      • Height Measurement
      • Volume Measurement
      • Volume Between Surfaces
      • Volume Between Surfaces Report
    • Hover
    • Hover Setting
    • Select and Clipping
      • Polygon Selection
      • Rectangle Selection
      • Sphere Selection
      • Circle Selection
      • Lasso
      • Line Above Selection
      • Line Below Selection
      • Plane
      • Subtract
      • Plane Above
      • Plane Below
      • Plane Inside
      • Plane Distance Settings
      • InCut
      • OutCut
      • Save And Cancel
    • Cross Section
      • Cross Section
      • Horizon Section
      • Clip By Polygon
    • Import
      • Import Vector
      • Import TXT
      • Import GPKG
    • Export
      • Orthophoto
      • Point Cloud Convert
      • Export Vector
      • Export Line To Point
      • Export Polygon To Point
    • Unroll
      • Unroll Polygonal Section
      • Unroll Curved Section
      • Unroll Cylindrical Section
    • Catch
  • Point Cloud Classification
    • Classify by Attribute
    • Classify Ground Points
    • Classify Ground Points by CSF
    • Extract Median Ground Points
    • Classify AirPoints
    • Classify by Cover
    • Classify by ClusterSize
    • Classify Below Surface Points
    • Classify by Height Above
    • Classify Low Points
    • Classify lsolated Points
    • Classify Closeby Points
    • Classify by Polygons
    • Classify by Polylines
    • Cylinder Detection
    • Classify by RegionGrow
    • Classify by Deeplearning
    • Classify by Manual Editing
    • Custom Deep Learning Classification
      • Install
      • Point Cloud Full Supervised Labeling And Weak Supervised Labeling Process
      • Prepare Point Cloud Training Data
      • Train Point Cloud Classification Model
      • Classify Point Cloud Using Trained Model
      • Report
  • Profile
    • Select Profile Region
      • Fixed Buffer
    • Measure Tools
      • Move Selected Section
      • Rotate Selected Section
      • Expand Selected Section
      • Switch View
      • Manual Classification
  • Vector Profile
    • Select Profile Region
    • Function Area
      • Fixed Selection Width
      • Move Selection
      • Rotate Selection
      • Expand Selection
      • Switch View
      • Measurement Tools
    • Node Editing
  • Panoramic Measurement Tools
    • Point Cloud and Panoramic Display Roaming
    • Transform
    • Calibration
    • ShowHide
    • Panoramic Measurement Based on Depth Interpolation
      • Pick Point
      • Pick MultiPoint
      • Measure Length
      • Measure Height
      • Measure Angle
    • Panoramic Measurement Based on Forward Intersection of Images
      • Pick Point
      • Measure Length
    • Result Panel
    • Setting Dialog
    • Update EXIF
    • BlurPlates And Face
  • Planar Images
    • Point Cloud and Planar Images Roaming
    • Transform
    • Calibration
    • ShowHide
    • Planar Measurement
      • Pick Point
      • Pick MultiPoint
      • Measure Length
      • Measure Height
      • Measure Angle
    • Image Undistort
    • Setting Dialog
    • Update EXIF
    • BlurPlates And Face
  • Raster
    • Settings
    • Measurement
    • Data Labeling
      • Image Labeling
      • Make Mask
    • Image Training
      • Environment configuration
      • Train Image Deep Learning Model
      • Report
      • Detect Or Segment Object Use Trained Model
      • 3D Mapping
      • Target Detection Training Case Tutorial
      • Semantic Segmentation Training Case Tutorial
      • Road Marking Training Case Tutorial
  • Map Element
    • Road Shape
      • Add Virtual Lane Centerline
      • Add Lane SolidLines
      • Add Lane DashLines
      • Add StopLine
      • Add Road Side Line
      • Generate Virtual Lane Centerline
      • Detect Solid Line
      • Detect Dash Line
      • Detect Road Side Line
    • RoadSurface
      • Add Straight Arrow
      • Add Left Arrow
      • Add Right Arrow
      • Add Left And Right Arrow
      • Add Straight and Left Arrow
      • Add Straight and Right Arrow
      • Add Straight and Left and Right Arrow
      • Add Turn Around Arrow
      • Add Straight and Turn Around Arrow
      • Add Left and Turn Around Arrow
      • Add Left Merge Arrow
      • Add Right Merge Arrow
      • Add Right and Turn Round
      • Add Straight and Right and Turn Round Arrow
      • Add Left and Right and Turn Round Arrow
      • Add Cross Walk
      • Add Longitudinal Speed Reduction
      • Add Speed Reductiuon
      • Add CrossWalk Warning
      • Add NoU-turn
      • Add No-Parking Area
      • Add Bicycle Lane
      • Add Font
    • Road Marking Training
    • Road Marking Matching
    • Road Vector
    • Merge To Lane
    • Generate Intensity Image
    • Average Intensity
  • Facility
    • Road Structure
      • Pole Struct Detection
        • Single Point Mode
        • Two Point Mode
        • Polygon Model
        • Grip To Ground
      • PowerLine Detection
      • Add Traffic Sign
      • Add Parking Spot
      • Add Rain/Strainer
      • Add Manhole
    • Road Facilicy Training
    • Road Facility Detection
    • Linear Facility Extraction
    • RailWay Detection
    • Pole Seed Editor
      • Update
      • Seed Point Conversion
      • Editor
    • Object Editor
      • Object Segmentation
      • Object Editor
      • Measurement
  • Vector Editor
    • Draw Vector
      • Point
      • MutiPoints
      • Line
      • Segment Line
      • Arc
      • Polygon
      • Rect
      • Parallelogram
      • Circle
      • Circle with Radius
      • Circle with Diameter
      • Hexagon
      • Octagon
    • Edit Element
      • Select
        • Pickup Vector
        • Rect Pickup Vector
        • Pickup by Line
        • Pickup by Polygon
        • Pickup by Lasso
        • Pickup by Circle
        • Pickup by Box
        • Pickup by Sphere
        • Pickup by Cylinder
      • Interrupt
        • Point Split Line
        • Line Split Line
        • Line Split Polygon
        • Line Split Objects
        • Layer Split Layer
      • Alignment
        • Move Vector
        • Parallel Copy Vector
        • Rotate Vector
        • Scale Vector
        • Mirror Vector
      • Reshape
        • ReShape Line
        • Reshape Rect
        • Merge Lines
        • Break Line
        • Split Lines
        • Extend or Trim
        • Split and Merge Polygon
        • Link Lines
        • Extend Lines
        • Fillet
        • Combination Polygons
        • Smooth
        • Point To Line
        • Line To Points
        • Construct Polygon
        • Intersection Line
        • Multipart To Singleparts
        • Densify
        • Weed Vertices
        • Buffer
        • Simplify
      • Auxiliary
        • Drape To Ground
        • Line To Polygon
        • Polygon To Line
        • Draw By Intersection
        • Perpendicular Draw
    • Node Editor
    • Auxiliary Line
      • Add H/V Lines
      • Add Gridlines
      • Add Lines
      • Pick Lines
    • Quality Check
      • Attribute Quality Check
      • Geometry Quality Check
    • Attribute Table
      • Select By Attribute
      • Field Calculator
      • Export Image
      • Status Bar
  • Appearance
    • Layer Manager
    • Symbol
    • Annotation
    • Label Layers
  • Floor Plan
    • Point Cloud Classification Tools
    • Auto Vectorization
    • Measurement
    • Vector Editor
      • Line
      • Draw By Intersection
      • Draw By Perpendicular
      • Merge Lines
      • Break Lines
      • Line Intersection
      • Move Vector
      • Close Line
      • Pick up Vector
      • Rect Pickup Vector
    • Node Editor
    • DXF
    • Blue Print
  • Facade Survey
    • Set Vertical
    • Base line
    • Boundary Line
    • Profile
    • Drawing
    • Tectonic Collect
    • Array
    • Edit
    • Export
  • Road Analysis
    • Height Limit Analysis
    • Height Limit Analysis Report
    • Clearance Analysis
    • Clearance Analysis Data Manager
    • Clearance Analysis Report
    • Bridge Clearance
    • Bridge Analysis Report
    • Pavement Damage Analysis
      • Detect Damage
      • Damage Editor
      • PCI
      • Export Report
    • Viewshed Analysis
      • Observation
      • Target
    • Road Section Analysis
      • Start and End Control
      • Data Manager
      • Design Data
      • Road Measure Data
      • Tunnel Measure Data
      • 2D Viewer
    • Orthophoto
      • Place Tile Array
      • Orthophoto Generation from Images
  • Road Surface
    • Classification Tools
      • Classify By Attribute
      • Classify Ground Points
      • Classify by Deeplearning
    • Manual Classification
    • Terrain Creation
      • Road Surface Key Points By Grid
      • Create TIN
    • Display
    • Vehicle simulation
      • Vehicle Passability Analysis
      • Vehicle Designer
    • Generate DSM/DEM Image
      • Base On PCD
      • Base On TIN
  • Road Scene
    • Model Display
    • Auto Modeling
      • Create Road Area
      • Road AutoModeling
      • Road Auto Facility
      • Texture Manager
      • Add Road Facility Layer
      • Add Building Layer
    • Model Edit
      • Import Road Scene
      • Import Model Symbol
      • Pick Model
      • Add Cube
      • Add Cylinder
      • Add Cone
      • Add Polygon
      • Auto Extract Texture
      • Manu Extract Texture
      • Set Code
      • Horzion Rotate By Attribute
      • Rotate By Attribute
      • Set Symbol Code By Attribute
      • Scale By Attribute
      • Absolute Scale By Attribute
      • Symmetric Rotate
      • Move Facility
    • Export
      • Export Road Scene
      • Export Road Models
  • Urban Forestry
    • Classify By Attribute
    • Classify by Deeplearning
    • Profile
    • Classify Selection
    • Normalization By Ground
    • Seed Editor
      • Seed Point Conversion
      • Update
      • Editor
      • DBH And Height Calculation
      • Azimuth
    • Tree Editor
      • Segmentation
      • Editor
      • Pick
      • Measurement
      • Export Report
      • Other Tools
      • Settings
    • DeNormalization
    • Ecological Landscape Analysis
      • Thematic Map
      • Export Report
      • Visual Analysis
      • Batch Visual Analysis
  • GSReconstruction
    • Reconstruction
      • Preparation Before Use
      • Reconstruction Process
    • Import
      • Import File
      • Define Initial Position
    • Show Hide
    • Measurement
    • Select
    • Select Save
    • Convert
      • Convert LiSplat To Ply
      • Convert Ply To LiSplat
    • Roaming
      • Camera Roaming
      • Trajectory Roaming
  • Display
    • Capture Image
    • Camera Roaming
    • Trajectory Roaming
    • Camera Setting
    • Viewers Layout
      • Tab Layout
      • Tile Layout
    • Window Linkage
    • Rolling Screen
    • Go To
    • 3D Mouse
    • Show/Hide
    • Customize the Ribbon
  • Toolbox
    • Tools
    • Favorites
    • Data Management
      • Point Cloud Tools
        • Extract
          • Extract By Elevation
          • Extract By Intensity
          • Extract By Return
          • Extract By Time
          • Extract By Class
          • Extract By Additional Attributes
        • Registration
          • Coarse registration
          • ICP registration
          • Registration Based on Homologous Point Pairs
        • Projections and Transformations
          • Define Projection
          • Define Unit
          • Geoid Model
          • Projection
          • Transform
          • Creating Conversion Relationships
          • Convert Projected Surface
          • Transformations Calculation
          • Seven-parameter solution control point file format
          • Elevation Adjustment
          • Adjust Elevation Report
        • Point Cloud
          • Cut Overlap
          • Clip By Polygon
          • Grid Analysis
          • Detect Moving Objects
          • Assign Groups
          • Assign Color To Points
          • Brightness Contrast
          • Transform GPS Time
          • Compute Normals
          • DeNormalization
          • Normalization By Ground
          • SubSample
          • Merge Data
          • Noise Filter
          • SOR Filter
          • Export Orbit
      • Vector Tools
        • Conversion
          • JSON to Feature
          • Feature to JSON
          • KML to Feature
          • Featur to KML
          • XY Table to Point
          • XY Table to Line
          • ASCII 3D to Feature Class
          • Feature Class Z to ASCII
          • Feature to3D By Attribute
          • Points to Line
          • Polygon to Line
          • Feature Vertices to Points
          • Feature to Point
          • Feature to Line
          • Feature to Polygon
          • Feature to Raster
          • Point to Raster
          • Polygon to Raster
          • Polyline to Raster
        • Extract
          • Clip
          • Split
          • Split By Attributes
          • Select
          • Table Select
        • Overlay
          • Count Overlapping Features
          • Erase
          • Identity
          • Intersect
          • Remove Overlap
          • Symmetrical Difference
          • Union
          • Update
        • Proximity
          • Buffer
          • Graphic Buffer
          • Multiple Ring Buffer
        • Quality Check
          • Attribute Check
          • Geometry Quality Check
        • Cartography
          • Simplify Line
          • Simplify Polygon
          • Densify
        • Projections and Transformations
          • Define Projection
          • Projection
          • Batch Define Projection
          • Batch Project
        • Import/Export
          • Import/Export Tables
          • Import/Export Vectors
      • Raster Tools
        • Conversion
          • Copy Raster
          • Raster To ASCII
          • Raster To Point
          • Raster To Polyline
          • Raster To Polygon
        • Projections and Transformations
          • Define Projection
          • Projection
          • Batch Define Projection
          • Batch Project
    • Preprocessing
      • Trajectory Segmentation
        • Segment Method
          • Segment Table
          • Trajectory Graph
          • Trajectory Quality Detection
          • Trajectory Jump Repair
      • Point Cloud
        • Colorize By Segments
          • Split By Segments
      • Calibration
      • Calculation Of Placement Error
      • GCP Adjustment
      • Strip Adjustment
      • Colorize Point Cloud
      • Trajectory To Vector
    • Cut Block
      • Subdivision
        • Point Cloud Subdivision
        • Point Cloud Cut Block
        • Create Along Trajectory
        • Create Along Center Line
      • Cut Block
        • Cut Block Edit
        • Split Point Cloud
      • Block Display
    • AutoCAD plugin installation
      • Install LiDAR360MLS Plugin for AutoCAD
      • Manually Configuring the LiDAR360MLS Plugin for AutoCAD
  • Color Tools
    • Display By Height
    • Display By Intensity
    • Display By Classification
    • Display By RGB
    • Display By Return Number
    • Display By GPSTime
    • Display By EDL
    • Display By Xray
  • Viewing Tools
    • Top View
    • Bottom View
    • Left View
    • Right View
    • Front View
    • Back View
    • Front Isometric View
    • Back Isometric View
    • Full Extent
    • Set View Mode
    • Configure Point Size And Type
    • Screen Capture
  • Project Management
    • Start Page
    • Project Tree Layer Management
      • Point Cloud
      • Image List
      • Trajectory
      • Vector
      • Table
      • Raster
      • GSReconstruction
    • Project Tree Window Management
    • Layer Manager
    • Display Mode
    • Feature Property
  • FAQ
    • Software Installation and License FAQ
    • Framework FAQ
      • Projection FAQ
      • Vector Edit Module FAQ
      • Field Calculator FAQ
      • Registration Module FAQ
      • Vector and Raster Toolbox FAQ
      • Customizing Deep Learning FAQ
    • BP Module FAQ
    • Geo Module FAQ
    • Asset Extraction Module FAQ
      • MapElement Module FAQ
      • Facility Module FAQ
    • Architectural Drawings Module FAQ
      • Floor Plan Module FAQ
      • Facade Survey Module FAQ
    • Road Condition Module FAQ
      • Road Analysis FAQ
      • Road Surface FAQ
    • Forestry Module FAQ
    • Road Scene Module FAQ
    • GSReconstruction Module FAQ
  • Appendix
    • Option
    • Display Options
    • Appendix High Performance Graphics Mode Adjustment
  • Published with GitBook

Trajectory Segmentation

Trajectory

  • Trajectory Segmentation

  • Segment Table

  • Trajectory Graph

  • Trajectory Quality Detection

  • Trajectory Jump Repair

results matching ""

    No results matching ""